home *** CD-ROM | disk | FTP | other *** search
- In article <1994Feb3.141624.9730@mnemosyne.cs.du.edu> jnash@nyx10.cs.du.edu (John Nash) writes:
- >From: jnash@nyx10.cs.du.edu (John Nash)
- >Subject: Re: Problem w/ Wintalk from elf.com -- help needed
- >Date: Thu, 3 Feb 94 14:16:24 GMT
-
- >In article <1994Jan31.070259.57951@kuhub.cc.ukans.edu>,
- >Jeff Bangert <jeff@kuhub.cc.ukans.edu> wrote:
- >>In article <2iicb4$ge9@agate.berkeley.edu>, rcham@soda.berkeley.edu (Ryan Hamilton) writes:
- >>>>>Whenever I load up wintalk w/ the smiley face, I get a minimized icon
- >>>>>for a couple of seconds then an error:
- >>>>> error gethostbyname()
- >>>
- >>> Is your nameserver set up correctly? A bad nameserver setting would
- >>> affect this.
- >>>
- >>> Ryan
- >>
- >>I have exactly the same problem. So now the question is --
- >>'namesever set up' where? While I am trying wintalk, I have
- >>WinQVT, ws_ftp, and other winsock apps running. They have no
- >>problem. I can't see how to set the nameserver in wintalk since
- >>it doesn't even get started. I've read the wintalk docs --
- >>nothing about a .ini file.
- >>
- >>Any suggestions?
- >>
-
- >I know it sounds dumb, but check your netmask. My netmask was set to
- >255.255.255.0 instead of 255.255.0.0, and half my applications worked
- >and half didn't - shouldn't none of them have worked? I didn't have
- >Wintalk at the time, so I couldn't check that one. All my other
- >winsock apps worked, but under DOS, nothing using the wattcp stack
- >(incl. kermit) would work. They crash with something like "name
- >site.sub.domain not found" errors.
- >--
- >cheers,
- >John
- >"I'm not responsible..." Ian Gillan, Perfect Strangers, 1984.
- ***** your pc must be named in in a host file for the name server, if you are
- using trumpet winsock then put your pc's ip address and a name in the "host"
- file.
-
-